Go!
Nav Menu 1
Backrests
Bagger Parts
Suzuki
Harley Davidson
Customer Gallery & Checklist
Harley
Yamaha Raider
Kawasaki VN 900
Suzuki M109R
Honda Fury / Sabre
Honda VTX
Shop by Brand
Harley
Kawasaki
Suzuki
Honda
Yamaha
Backrests
Fat Fork Tubes
Fat Tire Fenders
Honda
Kawasaki
Suzuki M109
Harley
Front Fenders
Lighting
Backrests
License Brackets
Other Components
Pulleys and Rotors
Seats
Honda VTX
Suzuki M109R
Yamaha Raider
Swing Arms
Tires
Triple Trees
Fury
Kawasaki
Honda VTX
Suzuki M109R
Wheels
Big Front Wheels (23 and up)
Custom Billet Designs
Mimic Series (all)
Installation
Toggle navigation
www.sumo-xstore.com
(
0
)
Backrests
Bagger Parts
Suzuki
Harley Davidson
Customer Gallery & Checklist
Harley
Yamaha Raider
Kawasaki VN 900
Suzuki M109R
Honda Fury / Sabre
Honda VTX
Shop by Brand
Harley
Kawasaki
Suzuki
Honda
Yamaha
Backrests
Fat Fork Tubes
Fat Tire Fenders
Honda
Kawasaki
Suzuki M109
Harley
Front Fenders
Lighting
Backrests
License Brackets
Other Components
Pulleys and Rotors
Seats
Honda VTX
Suzuki M109R
Yamaha Raider
Swing Arms
Tires
Triple Trees
Fury
Kawasaki
Honda VTX
Suzuki M109R
Wheels
Big Front Wheels (23 and up)
Custom Billet Designs
Mimic Series (all)
Installation
6" Honda Fury Fork Extensions (Special Order)
List Price: $190.00
Our Price:
$
190.00
Availability::
Usually Ships in 1 to 2 Weeks
Product Code:
SUMF-06-EXTSS
Description
Technical Specs/Installation
6" Stainless Steel Fork Extensions for Honda Fury. SPECIAL ORDER ITEM.
Please contact
[email protected]
for availability.
remove wheel by taking off the brake caliper, taking out the axle bolt, pulling the axle and rolling the wheel out,
take the fender off by removing the four bolts, 2 on each inside fender
do each side separately
loosen the pinch bolts on both top and bottom tree
slide the fork out of the top tree assembly carefully, should slide out easily, keep it in the bottom tree, reclamp in the bottom tree only with just the cap above the bottom tree. This will act as a vise so you can unscrew the fork cap.
take loose the stock cap, there is a metering rod on the inside a
that threads into the cap, this rod has a lock nut under the stock cap
use a second wrench to hold this nut so you can remove just the stock cap, you can gain access to this nut by forcing the lower tube up until you can get the wrench on that nut. Use a floor jack or bottle jack or some kind of jack to push the cap upwards.
if you are careful and don't move that nut it will serve as the length stop
transfer the o-ring from the stock cap to the new extensions, now simply screw on the new Stainless Steel extension to the stop nut, locking it onto the extension cap.
Screw the extension assembly back into fork tube making sure to not wreck the o-ring, tighten all the way, use a screwdriver through the cross hole to tighten as much as you can.
loosen the lower pinch bolts and slide the tube with the new extension either flush to the top of the stock tree, or bottomed out in the new SumoX triple tree assembly
repeat for the opposite side
re-install fender but don't fully tighten those bolts until after the wheel is installed
roll the wheel back in with the rotor on the left side, slide the axle in and torque the bolt to 50-60lb/ft. A drop or 2 of blue loctite wouldn't hurt.
finish tightening the fender bolts
make sure all pinch bolts are tightened on both halves and both sides or the triple tree assembly.
reinstall the caliper if you haven't already done that
RIDE SAFE!
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
Other Components
(